24" Sport Utility Boys Axe

The Sport Utility Axes are the best value on the market for a working axe! Nice thin handles, good quality steel and a nice working edge.

2.25 lb. Dayton axe head outfitted with a 24″ curved hickory handle. Popularly referred to as a “boy’s” axe. A “mid” sized tool. Dayton pattern originated from the Dayton, Ohio, area.

• Forged tool steel head. Made in USA.
• Hand sharpened, tapered bit for cutting and light splitting.
• ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
• Head coated with boiled Linseed Oil over the as forged finish.
• 24″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.  Hafted high and proud.
• Axe head is hydraulically seated onto handle and secured with a traditional double wedge system.
• The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/4″ of overall length of the handle is removed during assembly.